factory Outlets for Pc Abs Ul94 V0 - High rigidity PPO- GF, FR reinforced with glass fiber for water pump – Siko

Short Description:

Product Detail

Product Tags

Feedback (2)

Our solutions are widely regarded and trustworthy by consumers and may meet continually modifying financial and social requirements for Pa66 Ul94 V0, Pla Compostable Plastic, Pbt Gf30, While using the improvement of society and economy, our corporation will retain a tenet of "Focus on trust, high quality the first", moreover, we count on to make a glorious long run with each and every customer.

factory Outlets for Pc Abs Ul94 V0 - High rigidity PPO- GF, FR reinforced with glass fiber for water pump – Siko Detail:

PPO blends are used for structural parts, electronics, household and automotive items that depend on high heat resistance, dimensional stability and accuracy. They are also used in medicine for sterilizable instruments made of plastic.[3] The PPE blends are characterized by hot water resistance with low water absorption, high impact strength, halogen-free fire protection and low density.

This plastic is processed by injection molding or extrusion; depending on the type, the processing temperature is 260-300 °C. The surface can be printed, hot-stamped, painted or metalized. Welds are possible by means of heating element, friction or ultrasonic welding. It can be glued with halogenated solvents or various adhesives.

This plastic is also used to produce air separation membranes for generating nitrogen.[4] The PPO is spun into a hollow fiber membrane with a porous support layer and a very thin outer skin. The permeation of oxygen occurs from inside to out across the thin outer skin with an extremely high flux. Due to the manufacturing process, the fiber has excellent dimensional stability and strength. Unlike hollow fiber membranes made from polysulfide, the aging process of the fiber is relatively quick so that air separation performance remains stable throughout the life of the membrane. PPO makes the air separation performance suitable for low temperature (35-70 °F; 2-21 °C) applications where polysulfide membranes require heated air to increase permeation.

PPO Features

PPO has the smallest density and is non-toxic in compliance with FDA standards among the five major engineering plastics.

Outstanding heat resistance, higher than PC in amorphous materials

The electrical properties of PPO are the best in general engineering plastics, and temperature, humidity and frequency have little effect on their electrical properties.

Low PPO/PS shrinkage and good dimensional stability

PPO and PPO/PS series alloys have the best hot water resistance in general engineering plastics, the lowest water absorption, and small dimensional changes when used in water.

PPO/PA series alloys have good toughness, high strength, solvent resistance and spray ability

Flame-retardant MPPO generally uses phosphorus-nitrogen flame retardant, which has the characteristics of halogen-free flame retardant and meets the development direction of green materials.

PPO Main Application Field

The products on the market are improved products with excellent comprehensive properties. Widely used in electrical and electronic, automotive industry, machinery and chemical industries.

Field	Application Cases
Auto Parts	Well pumps, circulation pump, underwater pump bowl and impellers, coffee pot cover, shower, steam hot water pipe, valves.
Electrical & Electronic parts	Connectors, coil bobbins, LED boards, switches, relays bases, large displays, AC transformer adapters, IF transformer bobbins, sockets, engine components, etc.
Industrial parts and consumer products	Dashboard, battery pack, switchboard, radiator grille, steering column housing, control box, anti-frost device trim, fuse box, relay housing assembly, headlight reflector. Door panel, chassis, wheel cover, choke Board, fender, fender, rear view mirror, trunk lid, etc.

PPO

SIKO PPO Grades And Description

Field	Filler(%)	FR(UL-94)	Description
SPE40F-T80	None	V0	HDT 80℃-120℃, HighFlowability, Halogen FreeFalme Retardant V0
SPE40G10/G20/G30	10%-30%	HB	PPO+10%,20%,30%GF,Good dimension stability, resistant to Hydrolysis,
SPE40G10/G20/G30F-V1	10%-30%	V1	PPO+10%, 20%, 30%GF, Good dimension stability, resistant to Hydrolysis, Halogen free FR V1.
SPE4090	None	HB/V0	Good flowability,Chemical resistance, high strength.
SPE4090G10/G20/G30	10%-30%	HB	PPO+10%,20%,30% GF,good rigidity and chemical resistance.

Grade Equivalent List

Material	Specification	SIKO grade	Equivalent to Typical brand & grade
PPO	PPO Unfilled FR V0	SPE40F	SABIC NORYL PX9406
	PPO+10%GF, HB	SPE40G10	SABIC NORYL GFN1
	PPO+20%GF, HB	SPE40G20	SABIC NORYL GFN2
	PPO+30%GF, HB	SPE40G30	SABIC NORYL GFN3
	PPO+20%GF, FR V1	SPE40G20F	SABIC NORYL SE1GFN2
	PPO+30%GF, FR V1	SPE40G30F	SABIC NORYL SE1GFN3
	PPO+PA66 Alloy+30%GF	SPE1090G30	SABIC NORYL SE1GFN3

Product detail pictures:

Related Product Guide:

The really abundant projects management experiences and 1 to just one provider model make the high importance of business enterprise communication and our easy understanding of your expectations for factory Outlets for Pc Abs Ul94 V0 - High rigidity PPO- GF, FR reinforced with glass fiber for water pump – Siko , The product will supply to all over the world, such as: Johor, Tajikistan, New Orleans, They're durable modeling and promoting well all over the world. Under no circumstances disappearing key functions in a brief time, it's a should for you personally of fantastic quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the business make an awesome efforts to expand its international trade, raise its enterprise. rofit and improve its export scale. We are confident that we'll have a vibrant prospect and to be distributed all over the world in the years to come.

Abs Glass Fiber

Eco Friendly Plastic Packaging

Pa6 50 Gf

Pa6 6gf30

Pa6 Glass Fiber Reinforced

The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.